The ROTODIVERT-M is an electric motor actuator designed for operating rotary diverting valves (FDV 231, FDV 232, FDV 233). Actuators are controlled by 2-point signal (SPST) with built-in relay module. Unit can be manually operated.
Valves are available in DN 15 – DN 32, with internal or external thread or compression fittings and are rated PN10.
FIRŠT ROTODIVERT-M actuators with FDV 231,232 and 233 valves are designed for use in radiator, floor or remote heating systems and other small and medium sized heating or cooling systems.
Three types of connections are available: internal thread (FDV 231), external thread (FDV 232) and compression fittings (FDV 233).
| CODE | TYPE | DN | Kvs | Voltage | Rolation time | Control | Connection | A | B | C | Weight (kg) | |
| 10760 | ROTODIVERT-M 231 DN15 Rp ½" | 15 | 3 | 230V~50Hz | 18s/90° | 2P | Rp ½" | 36 | 72 | 113 | 0,85 | |
| 10761 | ROTODIVERT-M 231 DN20 Rp ¾" | 20 | 7 | 230V~50Hz | 18s/90° | 2P | Rp ¾" | 36 | 72 | 113 | 0,90 | |
| 10762 | ROTODIVERT-M 231 DN25 Rp 1" | 25 | 11 | 230V~50Hz | 18s/90° | 2P | Rp 1" | 41 | 82 | 113 | 0,95 | |
| 10763 | ROTODIVERT-M 231 DN32 Rp 1¼" | 32 | 15 | 230V~50Hz | 18s/90° | 2P | Rp 1¼" | 47 | 94 | 116 | 1,27 |
| CODE | TYPE | DN | Kvs | Voltage | Rolation time | Control | Connection | A | B | C | Weight (kg) | |
| 10764 | ROTODIVERT-M 232 DN15 G ¾" | 15 | 3 | 230V~50Hz | 18s/90° | 2P | G ¾" | 36 | 72 | 113 | 0,80 | |
| 10765 | ROTODIVERT-M 232 DN20 G 1" | 20 | 7 | 230V~50Hz | 18s/90° | 2P | G 1" | 36 | 72 | 113 | 0,86 | |
| 10766 | ROTODIVERT-M 232 DN25 G 1¼" | 25 | 11 | 230V~50Hz | 18s/90° | 2P | G 1¼" | 41 | 82 | 113 | 1,00 | |
| 10767* | ROTODIVERT-M 232 DN32 G 1½" | 32 | 15 | 230V~50Hz | 18s/90° | 2P | G 1½" | 47 | 94 | 116 | 1,23 |
| CODE | TYPE | DN | Kvs | Voltage | Rolation time | Control | Connection | A | B | C | Weight (kg) | |
| 10768 | ROTODIVERT-M 233 DN20 C22mm | 20 | 7 | 230V~50Hz | 18s/90° | 2P | CPF 22mm | 36 | 72 | 113 | 0,90 | |
| 10769 | ROTODIVERT-M 233 DN25 C28mm | 25 | 11 | 230V~50Hz | 18s/90° | 2P | CPF 28mm | 41 | 82 | 113 | 1,04 |
| Pressure class: | PN 10 |
| Medium: |
water, glycol < 50%
water quality as per VDI 2035 |
| Media temperature: | min. +2°C, max. +110°C |
| Leakage (Δ p=1 bar): | max. 0,2% Kvs |
| Max. diff. pressure: | 1 bar |
| Connections: |
Rp internal thread (EN 10226-1) G external thread (ISO 228-1) compression fittings (EN 1254-2) |
| Valve body: | Brass, CW617N |
| Shaft and rotor: | Brass, CW617N |
| Bushing: | PTFE |
| O-Rings: | EPDM,FKM |
| Control: | 2-point SPST |
| Supply voltage: | 230V~50Hz |
| Rotation time: | 18s/90° |
| Power consumption: |
9 VA (operation), 5 VA ( stand by relay on), 0 VA (stand by relay off) |
| Max.Torque: | 8Nm |
| Protection class: |
II
|
| Enclosure rating: | IP44 |
| Connection cable: | 4 x 0,5 mm2 , l= 1m |
| Direction of rotation: | not defined CW/CCW (90°/ 360°) |
| Manual control: | handle and the push button |
| Position indicator: | mechanical, on the actuator cover |
| Ambient temperature: | 0°C..+55°C |
| Storage temperature: | -10°C..+70°C |
| Humidity: | 0%..80% R.h. (non condensed) |
Actuator can be rotated on the valve body to fit different installation layouts and flow directions A-AB, B-AB, AB-A and AB-B.
